Enterprise Backups,

Data Storage, and Disaster Recovery

for Stratus ftServer V Series and

Continuum Systems

 Home DRA Products White Papers About DRA Customer Service Contact DRA Site Map

 

StorGateTM Storage Gateway

for VOS V Series to Hitachi Connectivity

Fiber Model

Product Brief

The DRA StorgateTM Storage Gateway drop-in solution provides VOS V Series hosts with seamless access to VOS data on Hitachi 99xx series storage arrays.

StorGate meets all requirements for a certified host. Stratus VOS V Series users can store and retrieve VOS data on their existing storage arrays while maintaining full support for their equipment.

 

 

Key Features

  • Provides drop-in fully supported VOS-to-Hitachi connectivity

  • Connects directly to Hitachi via Fibre Channel (FC-AL)

  • Connects to VOS V Series JBOD (D900 disk enclosure) via the output fiber port or directly to the host via U528 fiber controller 

  • Allows VOS to see Hitachi storage as common VOS disk types (D913, D914*)

  • Emulates VOS disks and disk trays - up to 14 virtual VOS disks per StorGate/RAID unit

  • Stores VOS data directly in VOS file format (Note: VOS does not support data sharing between hosts)

  • Can be duplexed to standard Stratus VOS disks or can be used in pairs for duplexing

  • Meets or exceeds native VOS disk performance in most applications (using Hitachi mirroring with metavolumes)

Subsystem Overview

StorGate provides a connection between a VOS V Series U528 or JBOD and Hitachi host adapter port. StorGate "on-the-fly" disk emulation and data translation capabilities allow VOS V Series users to store and retrieve data on a Hitachi storage array just as if the data were stored on standard Stratus disks.

Each StorGate unit provides access to up to 14 virtual VOS disk volumes on the Hitachi. Each of these virtual disks may be any supported VOS 9xx disk type. This means that each StorGate unit allows a VOS V Series to access up to 868 GB (physical) on a Hitachi. Multiple StorGate units may be attached to multiple fiber ports on a single VOS V Series host to provide access to as much Hitachi storage capacity as desired, up to the maximum allowed by VOS. Multiple StorGate units may also be used to allow multiple VOS V Series hosts to access one or more Hitachi storage arrays. (Although StorGate allows multiple VOS hosts to store data on a single Hitachi, VOS limitations prevent sharing that data between hosts.)

StorGate supports all VOS disk-related commands and functions.  It uses standard RAID hypers and metavolumes to store VOS data on a Hitachi. This allows the Hitachi to manage VOS virtual disks as standard RAID storage volumes. Both mirrored and Raid-S volume types are supported.

Physical Connections

A VOS V Series host connects to StorGate through a V Series JBOD or U528 fiber port. a Hitachi connects to StorGate through a Fibre Channel port on a Hitachi Fibre Channel host adapter. (Refer to the StorGate Technical Specifications for connection details.)

Performance

Laboratory tests indicate that for many applications StorGate provides throughput which equals or exceeds that of equivalent Stratus disks. In these laboratory tests the best performance was achieved when the virtual disks on the Target storage array were configured as Target-specific mirrored metavolumes. Performance in other environments may vary, and depends upon a variety of factors. These factors include application data access patterns, overall Target configuration, and I/O activity by other hosts attached to the Target.

Optional Feature: PowerPath Facility

The optional StorGate PowerPath Facility allows Stratus users to take advantage of EMC’s PowerPath, a host-based software that works with the storage system to intelligently manage I/O paths.

PowerPath supports multiple paths to a logical device, enabling the facility to provide automatic failover in the event of a hardware failure. PowerPath automatically detects path failure and redirects I/O to another path.

PowerPath also provides dynamic multi-path load balancing for many storage platforms.  It distributes I/O requests to a logical device across all available paths, thus improving I/O performance and reducing management time and downtime by eliminating the need to configure paths statically across logical devices.  Check with your EMC representative for support of load balancing on your storage platform.

PowerPath Facility runs automatically and without administration required.  PowerPath is enabled through a dual port fiber card as opposed to the single port fiber card that comes standard with StorGate.

Product Support

DRA products purchased through Stratus are supported jointly by DRA and Stratus. DRA products purchased directly from DRA are supported through the Co-active Maintenance Service (CMS). CMS is a total support agreement which is available "around the clock, around the world" to participating DRA customers. Product maintenance, product updates, documentation and training are available through CMS support. CMS is provided free of charge for 90 days following product installation, and may be extended by contract thereafter.

*  VOS D913 and D914 disks are currently supported on StorGates. Stratus no longer sells D913 disks, but the D913 disk type remains in VOS. Therefore, StorGates can be configured as D913s. If StorGates are partnered to StorGates or SuperSyncs, users may choose to use the D913 disk type, depending on their capacity needs. However, for most users it will no longer be practical to partner StorGates to Stratus D913 disks.

 

 

 

Send mail to webmaster@dra-hq.com with questions or comments about this web site.
Copyright © 2008 Data Research & Applications, Inc.
Last modified: November 17, 2008