StorGateTM
Storage Gateway
for
VOS Continuum to EMC Symmetrix DMX Connectivity
Fiber Model
Product Brief
The DRA StorgateTM Storage Gateway
is a drop-in solution which provides VOS Continuum hosts with seamless access to
VOS data on EMC Symmetrix DMX storage arrays.
StorGate meets all requirements for a
certified host. By using StorGate, Stratus VOS Continuum users
can store and retrieve VOS data on their existing storage arrays while
maintaining full support for their equipment.
Key Features
-
Provides drop-in fully supported VOS-to-EMC
Symmetrix DMX connectivity
-
Connects directly to DMX via Fibre Channel (FC-AL)
-
Connects directly to VOS Continuum via
K480 fiber controller or JBOD disk enclosure
-
Allows VOS to see DMX
storage as common VOS disk types (D913 and D914*)
-
Emulates VOS disks and disk trays - up to
14 virtual VOS disks per StorGate/RAID unit
-
Stores VOS data directly in VOS file format
(Note: VOS does not support data sharing between hosts)
-
Can be duplexed to standard Stratus VOS
disks or can be used in pairs for duplexing
-
Meets or exceeds native
VOS disk performance in most applications (using DMX mirroring
with metavolumes)
Subsystem Overview
StorGate provides
a connection between a VOS Continuum Fiber (K480) controller and
a DMX host
adapter port. StorGate "on-the-fly" disk emulation and
data translation capabilities allow VOS Continuum users to store and retrieve
data on a DMX just as if the data were stored on standard
Stratus disks.
Each StorGate unit provides access to up to 14
virtual VOS disk volumes on the DMX. Each of these virtual disks may be
any supported VOS 9xx disk type. This means that each StorGate unit allows a VOS Continuum to access up to
476 GB (physical) on a DMX storage array. Multiple
StorGate units may be attached
to multiple fiber ports on a single VOS Continuum host to provide access to as
much DMX storage capacity as desired, up to the maximum allowed by VOS. Multiple StorGate
units may also be used to allow multiple VOS Continuum hosts to access one or
more DMX storage arrays. (Although StorGate allows
multiple VOS hosts to store data on a single DMX, VOS limitations prevent
sharing that data between hosts.)
StorGate supports all VOS disk-related
commands and functions. It uses standard RAID hypers and metavolumes to store VOS data
on an EMC Symmetrix DMX storage array. This allows the DMX to manage VOS virtual
disks as standard RAID storage volumes. Both mirrored and Raid-S volume types
are supported.
Physical Connections
A VOS Continuum host connects to StorGate
through a Continuum K480 fiber controller or JBOD. A DMX storage array connects
to StorGate through a Fibre Channel port on the EMC Fibre Channel host adapter. (Refer
to the StorGate Technical Specifications for connection
details.)
Performance
Laboratory tests indicate that for many
applications StorGate provides throughput which equals or exceeds that of
equivalent Stratus disks. In these laboratory tests the best performance was
achieved when the virtual disks on the Target storage array were configured as
Target-specific
mirrored metavolumes. Performance in other environments may vary, and
depends upon a variety of factors. These factors include application data access
patterns, overall Target storage array configuration, and I/O activity by other
hosts attached to the Target storage array.
Optional Feature: PowerPath
Facility
The
optional StorGate PowerPath Facility allows Stratus users to take advantage of
EMC’s PowerPath, a host-based software that works with the storage system to
intelligently manage I/O paths.
PowerPath supports multiple paths to a logical device, enabling the facility to
provide automatic failover in the event of a hardware failure. PowerPath
automatically detects path failure and redirects I/O to another path.
PowerPath also provides dynamic multi-path load balancing for many storage
platforms. It distributes I/O requests to a logical device across all
available paths, thus improving I/O performance and reducing management time and
downtime by eliminating the need to configure paths statically across logical
devices. Check with your EMC representative for support of load balancing
on your storage platform.
PowerPath Facility runs
automatically and without administration required. PowerPath is enabled
through a dual port fiber card as opposed to the single port fiber card that
comes standard with StorGate.
Product Support
DRA products purchased through Stratus
are supported jointly by DRA and Stratus. DRA products
purchased directly from DRA are supported through the Co-active Maintenance
Service (CMS). CMS is a total support agreement which is available "around
the clock, around the world" to participating DRA customers. Product
maintenance, product updates, documentation and training are available through
CMS support. CMS is provided free of charge for 90 days following product
installation, and may be extended by contract thereafter.
* VOS D913 and D914 disks are currently supported on StorGates. Stratus
no longer sells D913 disks, but the D913 disk type remains in VOS. Therefore,
StorGates can be configured as D913s. If StorGates are partnered to StorGates or
SuperSyncs, users may choose to use the D913 disk type, depending on their
capacity needs. However, for most users it will no longer be practical to
partner StorGates to Stratus D913 disks.
